NEVER USE ABRASIVE CLEANSERS OR SCOURING PADS!!!

All finishes are sealed through a special process designed to protect them from oxidation and corrosion. Using abrasives will destroy this coating Voiding Warranty.
REMOVE LIME & MINERALS FROM YOUR WONDER® SHOWER!!

DO NOT let minerals build up on your Wonder Shower as, as they can quickly destroy the shower Voiding the Warranty. Periodic cleaning (water condition will help determine frequency) is recommended to help eliminate mineral build up on the out side and inside of your Wonder Shower. This way works great for me: Adjust the shower arm at a downward angle, rotate the showerhead so the holes face upward and the head is level. Spray with Lime-A-Way CLR or Clear Vinegar. Let stand for 15 minutes to remove mineral deposits, rinse solution off. Repeat procedure if necessary, until all deposits are removed. Do Not let solution stand for more than 15 minutes at a time without rinsing off, as it could harm the finish and void warranty. Follow manufacturer’s directions when using any kind of chemical cleaners. Always use in well ventilated area.

Note: There are a variety of products made to remove lime scale and/or minerals from your showerhead. Feel free to use the kind of cleaner you are familiar with making sure it doesn’t have any kind of abrasives and is recommended safe for use with electroplated finishes.

We recommend removing your Wonder Shower annually (more often with very hard water) and submerging it in white vinegar/baking soda mixture for approximately one hour. This will open up the waterways by removing mineral deposit build up inside the showerhead and extension arm. Replace showerhead and run water through it briefly before “Standing under your Wonder